Epson 1640SU - Perfection Photo Scanner Reference Manual Download

Page: 128 / 192

5-30

Options

Document Specifications

Document conditions

Check the following before feeding a document:

❏

Ink on the document is dry.

❏

The document has no holes, is not ripped or wrinkled, and
has no articles attached to it.

❏

The document has no staples or other objects attached that
might damage the feeder mechanism.

❏

The document has no folds closer than 5 mm from its edge.

❏

The document is not a multipart form or bound.

❏

The document has no rear carbon coating.

❏

The document has no cut out areas.

Size:

Width 3.3 to 8.5 inches (85 to 216 mm)
Length 5 to 14 inches (127 to 356 mm)

Thickness:

0.07 to 0.16 mm

Weight:

58 to 122 g/m²

Paper quality:

High-quality bond paper

Document type:

Documents printed with impact printers, laser
printers, or facsimile machines

Summary of Contents for 1640SU - Perfection Photo Scanner

































































































































































































Search results

Summary of Contents for 1640SU - Perfection Photo Scanner

Reviews:

Related manuals for 1640SU - Perfection Photo Scanner

Brands by name

Popular brands

Epson 1640SU - Perfection Photo Scanner, Reference Manual

Search results

Summary of Contents for 1640SU - Perfection Photo Scanner

Reviews:

Related manuals for 1640SU - Perfection Photo Scanner

Brands by name

Popular brands