Epson 1200 series User Manual Download Page 71

Page: 71 / 185

Using Your Scanner

4-5

R4C448
Rev. C

A5 size

CHAP4.FM

2/11/00

Pass 3

Proof Sign-off:
tanto name

SEI Y.Takasaki M.Fujimori

leader name M.Fujimori
editor name

SEI M.Kauppi

5. Close the document cover gently so that the document does

not move.

Note:

❏

Make sure the document is flat against the glass surface,
otherwise the image will appear fuzzy and out of focus. Also be
sure to close the document cover to prevent interference from
external light.

❏

Always keep the document table clean. See “Cleaning the
Scanner” in Chapter 7.

❏

Do not leave photographs on the document table for an extended
period of time as they may stick to the glass.

❏

Do not place heavy objects on top of the scanner.

6. Start your scanner software, and follow scanning instructions

described later in this chapter or your scanner software
reference guide.

Summary of Contents for 1200 series


























































































































































































Search results

Summary of Contents for 1200 series

Reviews:

Related manuals for 1200 series

Brands by name

Popular brands

Epson 1200 series, User Manual

Search results

Summary of Contents for 1200 series

Reviews:

Related manuals for 1200 series

Brands by name

Popular brands