Epson 11880 - Stylus Pro Color Inkjet Printer User Manual Download Page 68

Page: 68 / 182

Using the Printer Software (Mac OS X)

User’s Guide

Uninstalling the Printer
Software

To uninstall the printer software, follow the steps
below.

Uninstalling the printer driver

To uninstall the printer driver and EPSON Printer
Utility2, follow the steps below.

Turn off the printer, and unplug the
interface cable connected with the
computer and printer.

Close the all application software.

Double-click the hard disk icon.

Double-click the

Applications

folder, and

then double-click the

Utilities

folder.

Double-click the

Print Center

icon (for Mac

OS X 10.2.x) or

Printer Setup Utility

icon

(for Mac OS X 10.3 or later).

Select the printer, and then click

Delete

After clicking

Delete

, close the dialog.

Insert the printer software CD-ROM into
the CD-ROM drive.

Double-click the

Printer Driver

folder.

Note:

If the folder does not appear, double-click the

EPSON

icon on the desk top.

Summary of Contents for 11880 - Stylus Pro Color Inkjet Printer























































































































































































Search results

Summary of Contents for 11880 - Stylus Pro Color Inkjet Printer

Reviews:

Related manuals for 11880 - Stylus Pro Color Inkjet Printer

Brands by name

Popular brands

Epson 11880 - Stylus Pro Color Inkjet Printer, User Manual

Search results

Summary of Contents for 11880 - Stylus Pro Color Inkjet Printer

Reviews:

Related manuals for 11880 - Stylus Pro Color Inkjet Printer

Brands by name

Popular brands