Epson 11880 - Stylus Pro Color Inkjet Printer User Manual Download Page 108

Page: 108 / 182

Options and Consumable Products

108

User’s Guide

Options and
Consumable
Products

2007/03/07 17:39:571

Consumable Products

The following consumable products are available
for use with your printer (as of May, 2007).

Epson special media

See the following section for more detailed
information on Epson special media.

“Paper Information” on page 110

For the latest information on the media, see the
Epson Web site.

Ink cartridges

The printer driver provided with this printer is
color adjusted for genuine ink cartridges. If you
use non-genuine cartridges, the print may be
faint, or the end of the ink may not be detected
normally.

See the following section to replace the ink
cartridge.

“Replacing ink cartridges” on page 125

Note:

The product number varies by country.

Ink color

Product code

Stylus Pro
11880

Stylus Pro
11880C

Photo Black

T591100

T592180

Cyan

T591200

T592280

Vivid Magenta

T591300

T592380

Yellow

T591400

T592480

Light Cyan

T591500

T592580

Vivid Light
Magenta

T591600

T592680

Light Black

T591700

T592780

Matte Black

T591800

T592880

Light Light Black

T591900

T592980

Summary of Contents for 11880 - Stylus Pro Color Inkjet Printer























































































































































































Search results

Summary of Contents for 11880 - Stylus Pro Color Inkjet Printer

Reviews:

Related manuals for 11880 - Stylus Pro Color Inkjet Printer

Brands by name

Popular brands

Epson 11880 - Stylus Pro Color Inkjet Printer, User Manual

Search results

Summary of Contents for 11880 - Stylus Pro Color Inkjet Printer

Reviews:

Related manuals for 11880 - Stylus Pro Color Inkjet Printer

Brands by name

Popular brands