Epson 11880 - Stylus Pro Color Inkjet Printer User Manual Download Page 102

Page: 102 / 182

Variety of Printings

102

User’s Guide

Set drying time, if necessary.

You can set the ink drying time for each
print head pass. The range is 0.0 to 10.0
seconds.

1. Press the

button to select

DRYING

TIME

, and then press the

button.

2. Press the

button to select the time

in seconds.
3. Press the

button.

4. Press the

button to go back to the

previous menu.

Select the paper suction, if necessary.

1. Press the

button to select

PAPER

SUCTION

, and then press the

button.

2. Press the

button to select a

suitable setting for the paper.
3. Press the

button.

4. Press the

button to go back to the

previous menu.

After registering the paper settings, press
the

button to exit the Menu mode.

The custom paper setting is now
completed. Start printing to print on the
custom paper you just set.

To use the registered custom settings, follow the
steps below.

1. Press the

button to enter the Menu mode.

2. Press the

button to display

PAPER

SETUP

, and then press the

button.

3. Press the

button to select

PAPER TYPE

and then press the

button.

4. Press the

button to display

CUSTOM

PAPER

5. Press the

button to select media type,

and then press the

button.

Press the

button to exit the Menu mode and

then print the data.

Customize the Items of
the Printer Driver

You can save the settings or change the display
items as you prefer. You can also export the
settings as a file and make the same printer driver
settings to multiple computers.

Saving the printer driver
settings

You can save up to 100 settings.

Saving as a favorite

You can save all the setting items of the printer
driver.

Change the settings in the Main and Page
Layout menu.

Click

Save/Del...

in the Main or Page

Layout menu.

Note:

If the ink blurs on the paper, set a longer time
for ink drying.

Summary of Contents for 11880 - Stylus Pro Color Inkjet Printer























































































































































































Search results

Summary of Contents for 11880 - Stylus Pro Color Inkjet Printer

Reviews:

Related manuals for 11880 - Stylus Pro Color Inkjet Printer

Brands by name

Popular brands

Epson 11880 - Stylus Pro Color Inkjet Printer, User Manual

Search results

Summary of Contents for 11880 - Stylus Pro Color Inkjet Printer

Reviews:

Related manuals for 11880 - Stylus Pro Color Inkjet Printer

Brands by name

Popular brands