Epson 1010, User Manual

Page: 242 / 279

Character Sets
ESC t
Format:
Select Character Set
ASCII code: ESC t
n
Decimal: 27 116
n
Hexadecimal: 1B 74 n
Comments:
Selects the character table used by codes 128 to 255. Selecting a
graphics character set does not disable italic printing. Italic
printing can still be selected by ESC 4. The following values can be
used for n:
0: Selects the italics character set.
1: Selects a graphics character set.
2: Selects the user-defined character table and remaps user-
defined codes O-127 to 128-255.
Overrides
the
function of DIP switch 1-7. Note that the value of
n
must equal 00 hex, 01
hex,
or 02
hex.
ESC 4
Format:
ASCII code: ESC 4
Decimal: 27 52
Hexadecimal: 1B 34
Select Italic Mode
Comments:
Causes characters from the italic character set to be printed. This
command is valid even if a graphics character set has been
selected by ESC t or by DIP switch 1-7, but the character graphics
are not italicized.
9-34 Command Summary