Maintenance
31
8. Press down firmly on the ink cartridge clamp until it snaps in place.
If you need to replace the other ink cartridge, repeat steps 4 through 8 before
continuing with step 9.
9. Carefully lower the scanner and press it down until it clicks into place. Press the
x
Copy
button. The EPSON 1000 ICS begins charging the ink delivery system.
The
P
Operate
light flashes and the EPSON 1000 ICS makes noise. Charging
takes about half a minute. When it’s finished, the
P
Operate
light stops flashing
and stays on, and the
Error
light goes out.
Never turn off the EPSON 1000 ICS while the
P
Operate light is flashing,
unless the EPSON 1000 ICS hasn’t moved or made noise for more than
5 minutes.
Cleaning the EPSON 1000 ICS
To keep your EPSON 1000 ICS operating at its best, you should clean it periodically.
1. Turn off the EPSON 1000 ICS, unplug the power cord, and disconnect the USB
cable.
2. Remove all paper, then use a soft brush to clean any dust or dirt from the sheet
feeder.
3. Clean the exterior with a soft, damp cloth.
Summary of Contents for 1000 ICS
Page 1: ...EPSON 1000 ICS Basics ...
