Epson Stylus PRO 7000, Reference Manual

Page: 23 / 182

The Control Panel
1-15
Paper Configuration menu (PAPER CONFIG. MENU)
This menu allows you to register four kinds of paper thickness
together with ink drying time and suction setting from 1 to 4. You
can select whether the paper thickness is determined
automatically (
STD
(standard)) or by the registered value (
1
,
2
,
3
,
or 4 ). You can also register the ink drying time and suction setting
for the STD setting. The procedure for registering and recalling
the paper thickness setting is described in “Setting the paper
thickness” on page 1-21.
Note:
When you are loading very thin paper, set the Suction setting to LOW .
Otherwise, the paper may not be ejected properly and paper error may
occur.