Epson Stylus PRO 7000, Reference Manual

Page: 15 / 182

The Control Panel
1-7
* Indicates the Platen Gap setting is set to WIDE. When AUTO is selected, no
letter appears.
SelecType Settings
When to use SelecType
SelecType mode enables you to make printer settings similar to
those you would normally make in the driver or software, as well
as other additional settings, directly through the control panel.
Keep the following points in mind when making SelecType
settings:
❏
Application programs may send commands to the printer that
override SelecType settings. If you are not getting the results
you expect, check your application software settings.
❏
To see the current SelecType settings, print a status sheet.
Basic SelecType setting procedure
The following is the basic SelecType setting procedure.
1. Enter SelecType mode
Make sure that is displayed on the LCD panel, then
press the SelecType button.
The first menu, is displayed.
2. Select a menu
Press the
SelecType
button to select a desired menu.
For example:
To return to the READY status, press the Pause button.
MAINTENANCE
REQ. nnnn A part used in the printer has nearly reached
the end of its service life. Note the error number
“nnnn” and contact your dealer. See
“Customer Information” on page B-2.