![Epson Stylus PHOTO 830 Series Manual Download Page 232](http://html1.mh-extra.com/html/epson-stylus/photo-830-series/photo-830-series_manual_2420187232.webp)
223
Troubleshooting
❏
Check the
b
error light. If the light is flashing, replace the
appropriate ink cartridge.
See “Replacing Ink Cartridges” on page 197.
❏
Make sure that the
Minimize Margins
setting is not selected
under More Options in the Page Layout menu (Windows) or
that the
Maximum
setting is not selected as the Printable Area
in your printer software (Macintosh). When this setting is
selected, banding may occur in the expanded area.
❏
Make sure that the Media Type selected in the printer
software is appropriate for the type of media loaded in the
printer.
❏
Make sure the
MicroWeave
check box is selected when
available in the Advanced dialog box (Macintosh).
&
For Macintosh users, “Making Advanced settings” on page
91“Making Advanced settings” on page 91
Vertical misalignment or banding
Try one or more of these solutions:
❏
Make sure that the printable side of the paper is face up in the
sheet feeder.
❏
Run the Print Head Alignment utility.
&
“Aligning the Print Head” on page 170
❏
Clear the
High Speed
check box in the Advanced dialog box.
❏
Run the Head Cleaning utility to clear any clogged ink
nozzles.
&
“Cleaning the Print Head” on page 164
❏
Make sure that the Media Type setting selected in the printer
software is appropriate for the type of media loaded in the
printer.