© EPS Stromversorgung in 2022, this information is subject to change without notice
21
30000800_manual_psb_10000_4u_30kw_en_04
1.8.5
Control elements
Figure 1- Control Panel
Overview of the elements on the control panel
For a detailed description see section
“1.9.6. The control panel (HMI)”.
(1)
Touchscreen display
Used for selection and adjustment of set values, call of menus, as well as display of actual values and status. The
touchscreen can be operated with the fingers or with a stylus.
(2)
Rotary knob with push button function
Left knob (turn): voltage set value adjustment
Left knob (push): shift the decimal position (cursor) of the voltage set value
Right knob (turn): current, power or resistance set value adjustment
Right knob (push): shift the decimal position (cursor) of the currently assigned value
(3)
On/Off Button for DC terminal
Used to toggle the DC terminal between on and off, also used to start a function run. The LEDs “On” and “Off” indicate
the state of the DC terminal, no matter if the device is manually controlled or remotely.
(4)
Port for USB sticks
For the connection of standard USB sticks. See section
“1.9.6.5. USB port (front side)” for more details.
