20
5 Operation
5.1 Checklist before Start
1.
Check and ensure the battery has enough power.
2.
Ensure the outboard is correctly and firmly installed on the boat.
3.
Ensure the propeller is correctly and firmly installed on the outboard.
4.
Ensure the battery is correctly and firmly installed on the outboard.
5.
Before start, check and ensure the throttle is in zero position.
6.
Ensure the throttle can travel smoothly.
7.
Check the connections before each trip, ensure the connections are correct and
secure, no disconnection or worn or aging connections.
8.
Check and ensure the power port is dry to avoid short-circuit.
Only start the outboard when the propeller is under water.
If the cable has been immersed in water, please dry the cable thoroughly before
connection or turning on power.
5.2 Starting
Step1:
Put the kill switch on the proper position of tiller/remote control, and attach
the other end of the kill switch to your wrist or life vest
Figure 5-1
