ePropulsion SPIRIT 1.0 Evo User Manual Download Page 13

Page: 13 / 64

1.4 Declaration of Conformity

Object of the Declaration:

Product: Electric Outboard Motor
Model: SPIRIT 1.0 Evo, SPIRIT 1.0 Evo-S, SPIRIT 1.0 Evo-L

Company Name:

Guangdong ePropulsion Technology Limited

Address:

Room 201, Bldg.17A, 4th XinZhu Road, SongShan Lake District, Dongguan

City, Guangdong Province, China

The object of the declaration is in conformity with the following directives:

EMC-directive 2014/30/EU
MD-directive

2006/42/EC

RED-directive 2014/53/EU

Applied Standards:

EN 55014-1:2017

EN 300328:2019

EN 55014-2:2015

EN 50663:2017

EN 61000-3-2:2014

EN 62368-1:2014+A1:2017

EN 61000-3-3:2013/A1:2019

EN 60204-1:2018

EN 301489-1:2019

EN ISO 12100:2010

EN 301489-3:2019

This device complies with part 15 of the FCC Rules: Operation is subject to the follow-
ing two conditions:

This device may not cause harmful interference and,

This device must accept any interference received, including interference that

may cause undesired operation.

Signature:

Shizheng Tao, Chief Executive Officer & Cofounder of

Guangdong ePropulsion Technology Limited

Summary of Contents for SPIRIT 1.0 Evo
































































Search results

Summary of Contents for SPIRIT 1.0 Evo

Reviews:

Brands by name

Popular brands

ePropulsion SPIRIT 1.0 Evo, User Manual

Search results

Summary of Contents for SPIRIT 1.0 Evo

Reviews:

Brands by name

Popular brands