General structure:
The Combi machine (figure 1) has a modular design that is individually configured for a wide
variety of reshaping and replacement electrode applications. The machine can be oriented
vertically or horizontally, consist of a Cap Dresser assembly, Gearbox, Lenze smart motor
m300, Magazine, evacuation system that consists of a tube and a cap collecting canister, Stand
(supporting system), adapting plate allowing to switch between the vertical and horizontal
configuration.
The Combi machine is made up of several subcomponents as indicated by Figure 1 . Cleaning
of the milling tools from excess electrode material takes place during and after milling.
Removed electrodes are collected in separate integrated collection container.
Optional: Used electrodes and milling debris can be collected in separate waste container
depending on container configuration while electrical box configurations and stand
configurations can vary depending on need and requirement.
Figure 1 Combi Machine
Cap
Dresser
Assembl
Lenze Smart
Motor m300
Gearbox
Evacuation
Tube
Cap Collecting
Canister
Stand
Magazine
Adapting
plate
