Stand 02.01.09, GB 33, Geared head drill Page 27 of 52
4.2.2 Overview control elements mechanical
More control elements are located at the control panel:
Depth display and arrester
Protection stud and spindle to eject a tool
At the collateral walls and the front of the gear head are accessible at:
Feed lever 3 - armed
Choice lever for driving speed range with table
CHoice lever for feed factor
Picture 5: Position of the mechanic control elements
Chip protection
Picture 6: chip protection cover open (left) and close (right)
If the chip protection cover is not closed, the drive can not be activated.
An opening during the use leads to a machine stoppage.
