Epple Maschinen GB 33, User Manual

Page: 26 / 52

Stand 02.01.09, GB 33, Geared head drill Page 26 of 52
4.2 Control and indicator elements
The control and indicator elements are located at the following areas:

Control panel
Picture 4
4.2.1 Overview control elements electrical
The relevant control elements for the machine operator are located at the drill
head. In the face side of the head are grouped:

Driving speed and turning direction choice switch

Control mode switch for threading

Switch for coolant pump and machine light

Emitter
T the control panel are located at:

Switch „EMERGENCY STOP“

Switch „drive ON“ – switch „drive OFF“

Turning switch
„Table UP/DOWN“

Display for
„drive ON“ and „feed ACTIVE“

Depth scale