Stand 02.01.09, GB 32, Geared head drill
Page 13 of 54
1.6.1 Main switch lockable
T the control box is a lockable main switch with an optional u
– lock.
Picture 1: Main switch
WARNING!
Dangerous tensions also during deactivated mains witch. At areas which
are signed with the adjoining sign tension can also exist although the
mains plug is deactivated.
1.6.2 EMERGENCY STOP control
At the drilling machine at the front of a control panel an EMERGENCY
STOP is located.
Picture 2: EMERGENCY STOP control
You can release an used EMERGENCY STOP control by turning the
button in direction of arrow. Now it can jump out of the locking and
activate the machine again.
1.6.3 Chip protection
Click the chip protection in front of the tool for drilling. If the chip
protection is not closed, the drive does not start.
Picture 3: Chip protection
Summary of Contents for GB 32
Page 5: ...Stand 02 01 09 GB 32 Geared head drill Page 5 of 54 20 ACCEPTANCE CERTIFICATE 54 ...
Page 37: ...Stand 02 01 09 GB 32 Geared head drill Page 37 of 54 7 Exploded drawing 7 1 Table foot ...
Page 40: ...Stand 02 01 09 GB 32 Geared head drill Page 40 of 54 9 2 Exploded drawing gear housing 2 ...
Page 45: ...Stand 02 01 09 GB 32 Geared head drill Page 45 of 54 13 2 Exploded drawing drilling head 2 ...
