Stand 02.01.09, GB 32, Geared head drill
Page 23 of 54
3.5
First initiation
Warning!
At the first initiation through inexperienced personnel you endanger the
personnel and property values. We do not assume accountability for defects that
were caused by an incorrect use, f. e. by inexperienced personnel.
3.5.1 Cleaning
Clean up all areas which were supplied with anticorrosion agent for
transport and storage with petroleum.
The use of dissolver, diluents for cell lacquer or other cleansing
agents that may attack the lacquer are improper. Observe therefore the
information of the cleanser agent manufacturer.
Lubricate all bare machine parts. Use therefore an acid
– free
lubricant.
Lubricate all parts corresponding to the lubrication plan
3.5.2 Charging
Charging of the
feed gear
with 0, 5 litre of a gear oil of the type SAE
160 (or higher) up to the middle of the show window.
Charging of the
main motor gear
with 4, 5 litre of a gear oil of the
type SAE 160 (or higher) up to the middle of the show window.
3.5.3 Sight check
Attention!
Machine may not be connected with grid!
Remove during sight check all transport locks
Check whether the machine has visible defects, f. e. damaged
cables, disconnected pipes or leakages.
3.5.4 Manual function check
Attention!
Machine may not be connected with grid!
Check all mechanical components about smoothness.
Check all control elements about mechanic function and smoothness.
Summary of Contents for GB 32
Page 5: ...Stand 02 01 09 GB 32 Geared head drill Page 5 of 54 20 ACCEPTANCE CERTIFICATE 54 ...
Page 37: ...Stand 02 01 09 GB 32 Geared head drill Page 37 of 54 7 Exploded drawing 7 1 Table foot ...
Page 40: ...Stand 02 01 09 GB 32 Geared head drill Page 40 of 54 9 2 Exploded drawing gear housing 2 ...
Page 45: ...Stand 02 01 09 GB 32 Geared head drill Page 45 of 54 13 2 Exploded drawing drilling head 2 ...
