Assembly instructions
(Original)
BT / BM / BF Gearboxes
Doc. No. : 1002
Version 1 dated 18/10/2018
Page 11/11
NOTICE
Damages to the gearbox due to the wrong quantity of lubricant.
Insufficient lubricant can result in a damaging of the gearbox.
Too much lubricant can result in an excessive heating.
Fill in each time the specified quantity of lubricant.
After the filling of the lubricant, close the screw plug again.
The drained oil has to be disposed of acc. to chapter 9.2.
9
Decommissioning
CAUTION!
Dismantling and disposal may only be carried out by accordingly qualified trained
personnel.
9.1
Dismantling
Before dismantling the gearbox, always switch off the machine and secure it against
a restart. In addition is has to ensured that the machine cannot move.
DANGER!
Death or extremely serious injury / crippling caused by moving machine elements
when accidentally switched on or by accidentally releasing stressed components
during dismantling.
9.2
Disposal
ENVIRONMENTAL HAZARD!
Environmental compatibility, health risks, disposal regulations and the local possi-
bilities of proper disposal must be observed.
Any and all operating materials, in particular oils, fats and lubricants are to be dis-
posed of according to the national and regional applicable regulations.
CAUTION!
Skin irritation by intensive contact with synthetic oil.
