Radia Twin Size Loft Bed
5119: RA-TW-LB-NB
Congratulations on the purchase of your
Radia Loft Bed.
This bed has been crafted to the highest standards
of quality and safety and will give you many years of enjoyment and practical use. Your loft bed can be used
for sleeping and also for a highly space efficient work area under the bed.
Since this bed is a natural wood product, there will be variations in color and grain, and minor checking may
occur. This is normal and does not compromise the integrity of your bed. In fact, variation in character of
solid hardwood is integral to the beauty and appeal of hardwood furniture, and distinguishes it from
prefabricated, synthetic and composite materials.
Several basic safety considerations must be adhered to when using this bunk bed.
On this insert you will find a list of the hardware and loft bed parts necessary for assembly, as well as
detailed instructions. Assembly is quite simple and requires only a flat head screwdriver and a Phillips head
screwdriver. The use of a power drill with the clutch set on low and a Phillips head attachment is helpful but
not necessary. Assembly will be most easily accomplished if you take the time to carefully sort the hardware
and familiarize yourself with the function of each piece.
If you should require assistance with assembly, part replacement or any other matter, contact the toll-free
Epoch Design Service Center from anywhere in the Continental United States, Monday through Friday,
9 AM – 5 PM Pacific Standard Time at 1-800-589-7990. You may also email your request or comments to
[email protected] and a service representative will respond.
Thank you and Enjoy
HAVE QUESTIONS OR CONCERNS? CALL US FIRST: 1-800-589-7990
Copyright © 2018 Epoch Design™ All rights reserved
• Never allow a child under 6 years on a loft bed
• Always use the recommended size mattresses or mattress supports:
Standard twin 38"x 74" (96.5 cm x 188 cm) to help prevent the likelihood of entrapment or falls
• Ensure thickness of mattress does not exceed 9" (22.9 cm) for the upper bed
• Surface of mattress must be at least 5" (12.7 cm) below upper edge of safety rails
• Always use safety rails on both sides of upper bed
• Do not allow horseplay on or under bed(s) and prohibit jumping on the bed(s)
• Prohibit more than one person on the loft bed
• If the loft will be placed next to a wall, the safety rail that runs the full length of the bed should be placed
against the wall to prevent entrapment between the bed and the wall
• Follow the information on the warnings appearing on the loft bed end board and on the carton
• Do not remove warning label from bed
• Periodically check and ensure that the safety rails, ladder and other components are in their proper
positions, free from damage, and that all connectors are tight
• Do not use substitute parts
• Contact manufacturer or dealer for replacement parts
• The use of a water or sleep flotation mattress is prohibited
• Keep these instructions for future reference
• Use of a night light may provide added safety precaution for a child using the upper bunk
•
STRANGULATION HAZARD -
Never attach or hang items to any parts of the bunk bed that are
not designed for use with the bed, including but not limited to hooks, belts or jump ropes
TO HELP PREVENT SERIOUS OR FATAL INJURY FROM ENTRAPMENT OR FALLS:
2-Aug-2018
2/5
