background image

pg. 1

 © 2013 Episode

®

 

ECS-650-IC Owner’s Manual

WELCOME TO EPISODE

®

Thank you for purchasing a great product from 
Episode®, one of the best sounding speaker lines 
available today.  We appreciate your purchase 
and are committed to providing the highest quality 
products possible. 

The ECS-650-IC series speaker line is a superb 
choice for 70V/100V music distributed-line systems 
and can even be set to bypass the transformer if 
you need an 8 ohm speaker in a pinch.  They can 
be installed in either drywall or acoustic ceiling tile 
systems and feature UL approval for plenum-rated 
ceilings and spaces.

KIT-ECS-650-IC-4  

 

KIT-ECS-650-IC-6

 

KIT-ECS-650-ICSUB-8  

 

OWNER’S MANUAL 

Episode

®

 Commercial 650 Series

In-Ceiling Speaker     

 

•  (1) ECS-650-IC Loudspeaker
•  (1) Cut-out template
•  (1) Speaker grille
•  (1) Speaker grille Tool

•  (2) Speaker bracket wing nuts
•  (2) Speaker bracket arms
•  (1) Speaker bracket ring

PACKAGE CONTENTS

•  #2 Phillips Screwdriver
•  Small Flathead Screwdriver

•  Sheetrock Saw
•  Wire Strippers

TOOLS REQUIRED

The installation methods should be in accordance with the applicable section of the National Electrical Code, 
ANSI/NFPA 70, and/or the National Fire Alarm Code, ANSI/NFPA 72, as applicable. The wiring method and 
compartment should not interfere with the operation of the speaker.

IMPORTANT INSTRUCTIONS AND CONSIDERATIONS FOR INSTALLATION

It is highly recommended that the speakers be painted prior to installation. If it is necessary to paint them while 
installed, the provided paint mask should be used in place of the grille to protect the speaker. The grille may 
be painted as well with great care taken not to clog the fine holes with paint. Only paint grilles when they have 
been removed from the speakers.

PAINTING SPEAKERS

Summary of Contents for KIT-ECS-650-IC-4









Reviews: