Episode ES-SUB-EVO10-450, Installation Manual

Page: 11 / 16

page | 11
© 2018 Episode®
REFERENCE
CONNECTIONS AND CONTROLS
ES-SUB-EVO8-260
100-120V 220-240V
POWER
HIGH LEVEL
CROSSOVER
PHASE
VOLUME
STATUS
LFE
LOW LEVEL
AUTO
OFF ON
IN
IN
L
R
OUT
OUT
ES-SUB-EVO8-250
Designed and Engineered in USA
Manufactured in China
50 LFE
0 ˚ 180 ˚
100
MIN MAX
100-120V~60Hz 1.6A /
220-240V~50Hz 0.8A
DC 5V /500mA
8
7
11
12
9
10
6
5
3
2
1
4
1. Status Led
Red- Subwoofer is in standby mode, or power mode switch is set to OFF. AC power is present.
Blue- Subwoofer power mode switch is set to ON, or is set to AUTO and signal is being received.
2. Power Mode Switch
3 way toggle switch for setting power mode to OFF, AUTO, or ON.
3. Volume Knob
Adjust subwoofer volume.
4. Phase Knob
Set the phase of the subwoofer in relation to the listening area. Continuously variable from 0 to 180°.
5. Crossover Knob
Adjust the crossover frequency (limits the highest frequency the subwoofer will play).
NOTE: Set the crossover knob to “LFE” if the LFE input is used.
6. LOW LEVEL Inputs & Outputs (RCA)
For left/right or LFE connections from audio source, and outputs for connecting other equipment. To connect
LFE, use the L (left) channel connections.
7. HIGH LEVEL Inputs & Outputs (Speaker Wire Binding Post)
Connect left/right connections from speaker cable runs, and loop to other speakers.
8. Voltage Selector Switch
Select the input voltage. Default: 100-120V.
9. Master Power Switch
Rocker switch to turn power off to the subwoofer. Power LED will be off if switch is off but power is present.
10. Power Cord Inlet
Connect the included cord for providing power.
11. USB Port
A 5V USB port on the subwoofer back panel provides a power source for an Episode Wireless receiver.
Note: Successful operation is not guaranteed with devices other than the Episode Wireless Kit. (Wireless Kit
sold separately.
12. Wireless Receiver Holding Bolts
Secure the Wireless receiver to the subwoofer.