Episode ECS-AW70V, Owner'S Manual, Page: 5 / 8

pg.5
© 2012 Episode
ECS-AW70V Installation and Users Manual
Threaded Mounting Screw Installation
The ECS-AW70V is equipped with (2) M6 threaded inserts located on the back of the
speaker that can be used for other types of mounting brackets or for a security cable.
Make sure to select a bracket/cable capable of supporting the weight of the speaker.
Connections and Calibration
Proper connections are important to the performance of any loudspeaker within an
audio system. Performing the following steps will ensure proper connections for
optimum speaker performance:
1. At each loudspeaker connection, ensure that the outer jacket is separated by at
least 2 inches.
2. Strip the insulation on each conductor approximately ¼” and insert into the speaker
terminals.
3. Ensure that there are no stray strands of wire protruding from the connectors.
4. Observe proper polarity (+ to + and – to – ) for each speaker and at the amplifier).
Transformer Tap Settings
The ECS-AW70V loudspeakers have an adjustable tap settings knob located above
the input terminals on the rear of the loudspeakers. Simply rotate the Tap Settings dial
on the rear of the speaker to the desired wattage.
70V
7.
5W
15
W
30
W
7.5
W
3.7
5W
100V
30
W
15
W
70V Setting
100V Setting
Note Orientation of
Terminals