Epiroc RD 100, Safety And Operating Instructions Manual

Page: 26 / 32

Safety and operating instructions
26 © Construction Tools PC AB | 98001365 01 | 2020-09-24
Original Instructions
9 Storage
n
Disconnect the machine’s hoses from the power
source, see "Start and stop".
n
Make sure that the machine is properly cleaned be-
fore storage.
n
In case of long-term storage, the striking piston must
be protected against corrosion. This is done by push-
ing it (through the bushing) to its upper position while
the machine is placed up-side-down. As the quick-re-
lease couplings are blocked when disconnected, the
striking piston must be pushed upwards with the
hoses mounted but the power pack inactivated.
n
Store the machine in a dry place.
10 Disposal
A used machine must be treated and scrapped in such a
way that the greatest possible portion of the material can
be recycled and any negative influence on the environ-
ment is kept as low as possible.
Before a used machine is scrapped it must be emptied
and cleaned from all hydraulic oil. The remaining hy-
draulic oil must be deposited and any negative influence
on the environment is to be kept as low as possible.
Environmental Product Compliance - Reach Declara-
tion
Presence and name of substances in the products that is
included in EU Reach Candidate List of Substances of
Very High Concern are set out in the relevant Spare
Parts Catalog of each product.