Epiroc RD 100, Safety And Operating Instructions Manual

Page: 24 / 32

Safety and operating instructions
24 © Construction Tools PC AB | 98001365 01 | 2020-09-24
Original Instructions
ing. Make sure that the inner hexagonal shape of the
seal is aligned with the inner shape of the bushings.
Failure to do this might cause water leakage.
6. Reassemble the Drill steel Gaiter in it's groove and
align it with the hexagonal shape of the bushing.
7.4 Every 100 hours of operation
or 3 times per year
n
After each operating period of approximately 100
working hours (5000 drill meters) or three times a
year. The machine must be inspected and serviced
by authorised staff, trained for this task.