Recording
77
VGA Grid User Guide
configurations. If required, contact your network administrator for assistance with
getting the System to connect to the server.
Figure 59 Configuring the RSync Client
To configure the RSync client:
1.
Select
RSync Client
in the
Protocol
field.
2.
Enter the
Server address
.
3.
Enter
Server module
which is a directory on the RSync server.
4.
Enter the
Login
and
Password
required to authenticate with the RSync
server to connect to the server share.
5.
Select the
Checksum
checkbox to enable computing checksums algorithm
applied during file synchronization between sender and recipient servers.
6.
Select
Apply
.
The VGA Grid will then attempt to connect to the RSync server. The Web admin
interface displays messages about whether the System is able to connect to the
RSync server and the status of the connection.
9.11.4
Configuring the FTP Client
Use the FTP client configuration to have the VGA Grid act as an FTP client to an FTP
server to upload broadcast files. Different networks may have different FTP server
configurations. If required, contact your network administrator for assistance with
getting the System to connect to the server.