epiphan Pearl User Manual Download Page 328

Page: 328 / 342

Pearl User Guide

Configuration keys for third party APIs

Audio configuration keys

The following audio configuration keys are supported. For more information on individual items listed, see

Configure Encoding (Multi-source)

Table 50

Supported Audio Configuration Keys

Key

Values

Description

audio

on
empty string ("")

Enables or disables audio for the stream.
To enable audio, set to on.
To disable audio, set to an empty string ("").

audiobitrate

32
64
96
112
128
160
192

Specifies the audio bitrate for the stream.
Not applicable for PCM audio codecs.

audiochannels

1 (mono)
2 (stereo)

Specifies the number of audio channels.
For mono, set to 1.
For stereo, set to 2.

audiopreset

CODECS:
pcm_s161e  (PCM)
libmp3lame (MP3)
libfacc (AAC)

RATES:
  32
  64
  96
  112
  128
  160
  192

Specifies an audio code preset in the format CODEC;RATE.

i.e. libfaac;128

Stream publishing configuration keys

The system supports the following stream publishing settings. For more information on publishing the
stream, see

What is streaming?

315

Summary of Contents for Pearl























































































































































































































































































































































Search results

Summary of Contents for Pearl

Reviews:

epiphan Pearl, User Manual, Page: 328 / 342

Search results

Summary of Contents for Pearl

Reviews: