epiphan Pearl-2 Rackmount User Manual Download

Page: 401 / 497

Pearl-2 User Guide

Configure AFU to RSync server parameters

Prerequisites

Channels and recorders are already added for AFU, see

Choose files to include in AFU

AFU is enabled and the parameters configured, see

Enable AFU and set parameters

To set the FTP server parameters for AFU:

1. From the Automatic File Upload configuration page, select

FTP Client

as the protocol transfer type.

2. Specify the target

Server address

. If your system is configured with DHCP or has a valid DNS

configuration (see

Configure DHCP

), you can use the server’s fully qualified domain name instead of

the IP address.

3. Specify the

Server Port

used for the target FTP server. The standard port is 21.

4. Enter the FTP account username in the

Login

field.

5. Enter the FTP account password in the

Password

field. The characters are masked with dots.

6. Select

Use temp file

to name files with a temporary filename extension (.part) on the server until

upload is complete.

7. Click

Apply

Configure AFU to RSync server parameters

You can automatically upload recordings to an RSync server when you select RSync as the AFU protocol
transfer type using the Admin panel.

The following table describes the parameters to configure for AFU to an RSync server.

388

Summary of Contents for Pearl-2 Rackmount


















































































































































































































































































































































































































































































































Search results

Summary of Contents for Pearl-2 Rackmount

Reviews:

Related manuals for Pearl-2 Rackmount

Brands by name

Popular brands

epiphan Pearl-2 Rackmount, User Manual

Search results

Summary of Contents for Pearl-2 Rackmount

Reviews:

Related manuals for Pearl-2 Rackmount

Brands by name

Popular brands