LiveScrypt User Guide
Pair the LiveScrypt device
Pair the LiveScrypt device
You must pair the LiveScrypt device to your free AV Studio account that has transcription services setup
before you can use the device for live transcription. You can set up an account the first time you pair your
LiveScrypt device or you can set it up in advance, see
Create an account and enable transcription services
The device ID pairing code appears on the touch screen when the device isn't paired.
You can unpair the device using AV Studio. When you do, the device ID pairing code changes value. The next
time you pair the device with AV Studio, it shows up as a new device in AV Studio with the new device ID. To
pair the device using AV Studio, see
Important considerations
l
The LiveScrypt device's entry in AV Studio permanently goes offline when you unpair. You must pair
the device again to start a new transcription session.
l
If you pair LiveScrypt again after you have successfully unpaired from AV Studio, it shows up as a new
LiveScrypt device in AV Studio. The previous instance of the device remains permanently offline.
l
If you don't see the pairing code on the touch screen and the device isn't currently paired with AV
Studio, you can find the pairing code in the Settings. Tap the gear icon at the bottom right corner of the
touch screen and select
System
. Under the
Your device
section, use the
Device ID
as the pairing
code.
To pair and unpair the LiveScrypt device:
1. Login to your AV Studio account. Go to
Your default AV Studio team is automatically selected.
2. Select the
LiveScrypt
menu icon to open the LiveScrypt devices page, and then select
Pair device
.
19