manualshive.com logo in svg

epiphan KVM2Ethernet, User Manual, Page: 85 / 188

Share
Download
epiphan KVM2Ethernet User Manual Download Page 85

4. Mac OS X VGA2Ethernet user interface

Menus

User Guide

Page 85

Tools Menu

Use the commands on the Tools menu to show VGA Mode 

Information, to upload or save an EDID file, to enter or reset 

KVM mode and to send a Ctrl-Alt-Del command to a machine 

managed by a KVM2Ethernet device.

Figure 35:Viewing VGA information

Show VGA 

Mode 

Information

Display low level information about the Frame 

Grabber VGA mode. When requested, you can 

use this command and copy this information into 

an email to send to Epiphan Support.

Upload 

EDID To 

Device

Upload an extended display identification file to 

the device. See 

“About EDID” on page 69

.

Read EDID 

From 

Device

Save a copy of the device extended display 

identification file to the video capture 

workstation. See 

“About EDID” on page 69

.

Enter KVM 

Mode

Start operating the VGA2Ethernet user interface 

in KVM mode.

Reset KVM

Re-connect KVM mode if KVM stops functioning.

Send Ctrl-

Alt-Del

Simulate pressing Ctrl-Alt-Del on the machine 

managed by the KVM2Ethernet device. This 

command is useful for rebooting or displaying the 

task manager on Windows-compatible machines.

Summary of Contents for KVM2Ethernet





























































































































































































Reviews:

No comments