epiphan KVM2Ethernet, User Manual

Page: 84 / 188

4. Mac OS X VGA2Ethernet user interface Menus
Page 84 VGA2Ethernet
View Menu
Use the commands on the view menu to control the parts of the
VGA2Ethernet user interface window that are displayed.
Show/Hide
Device List
Open or close a drawer on the side of the
capture window showing a list of the Frame
Grabbers connected to the video capture
workstation. Each list entry includes a
thumbnail of the image in the capture window,
the name, and serial number of the device, and
the screen resolution and refresh rate of the
video source. You can use the list to switch
between devices displaying captured images in
the capture window.
Show/Hide
Device
Information
Enable or disable displaying information about
the current Frame Grabber at the top of the
VGA2Ethernet user interface window. The
display shows the hardware type, location (IP
Address), serial number, video mode, frame
rate and data rate of the device.
Show/Hide
adjustment
Controls
Override image adjustments. When the
VGA2Ethernet user interface first starts, the
application and the Frame Grabber adjust the
captured image for optimal appearance.
However, you may need to override these
image adjustment settings to improve the
image quality. See “Configuring Image
Adjustments” on page 115 .
Enter Full
Screen
Scale the VGA2Ethernet user interface window
to fill the screen. Press Command-F to exit full
screen mode.
Hide/Show
Toolbar
Enable or disable displaying the toolbar at the
top of the VGA2Ethernet user interface.