epiphan KVM2Ethernet, User Manual

Page: 50 / 188

3. Windows VGA2Ethernet user interface Menus
Page 50 VGA2Ethernet
KVM Menu
Use the KVM menu if you are using a KVM2Ethernet device. See
Chapter 10. “Using the KVM2Ethernet Device” on page 165 for
more information.
Help Menu
Use the Help menu to Check for Updates and to display
information about the version of the VGA2Ethernet user interface
that you are running.
Note: Check for Updates will only recommend an update if
Epiphan recommends that you install a new version. This will
happen if the latest version contains significant bug fixes or
enhancements. If a new VGA2Ethernet user interface version only
contains minor changes or if you are running the current version,
Check for Updates may not recommend that you install a new
version and will not display any information.
Measure
VGA Mode
When requested by Epiphan technical support,
you can use this command to display low-level
information about the VGA mode that you are
capturing with your Frame Grabber. You can
copy this information into an email to send it to
Epiphan technical support.
Options
Configure recording, display, KVM, and sharing
(Internet Broadcasting) settings. See “Recording,
Display, KVM, and Sharing Options” on
page 54 .
Enter KVM
Mode
Start operating the VGA2Ethernet user interface in
KVM mode.
Reconnect
KVM
Re-connect KVM mode if KVM stops functioning.
Send Ctrl-
Alt-Del
Simulate pressing Ctrl-Alt-Del on the machine
managed by the KVM2Ethernet device. This
command is useful for rebooting or displaying the
task manager on Windows-compatible machines.