epiphan KVM2Ethernet, User Manual

Page: 43 / 188

3. Windows VGA2Ethernet user interface Common Procedures
User Guide Page 43
2 Enter the file name, select the location for saving the video file,
and select Save .
As images are captured by the Frame Grabber they are
recorded to the video file. The status bar shows the name and
location of the video file. The status bar also displays the
amount of time that the video has been recording and the
number of frames (or images) recorded.
When the size of the video file reaches the AVI file size limit
(see “AVI file size limit” on page 142 ) the VGA2Ethernet user
interface does one of the following:
• stops recording
• starts a new video file and continues recording
( “Configuring Video File Recording Options” on page 141
describes how to specify the file name)
• overwrites the original video file and continues recording.
You can pause recording by selecting
Pause from the Capture
menu or from the toolbar.
You can stop recording by selecting Stop Recording from the
Capture menu or from the toolbar.
When you stop recording, the Status bar shows the name and
location of the saved video file, the amount of time that the
video file was recording, and the number of frames (or images)
recorded. For example: Wrote c:\temp\example.avi (85 sec,
464 frames) .
Starting web Broadcasting
Before broadcasting captured images over the Internet you need
to set the display format to 24 bits per pixel. See Chapter 9. “Web
Broadcasting” on page 157 for more information about setting up
web broadcasting.