epiphan KVM2Ethernet User Manual Download Page 125

Page: 125 / 188

6. Web admin interface

System Information

User Guide

Page 125

Scroll down to

System Information

and select

View System

Information

Confirm that the device is running the new firmware version.

System Information

Scroll down to

System Information

and select

View System

Information

to display the following:

• The current firmware version including details of the

firmware build

• Information about the device
• Information about the device CPU
• VGA mode information.

Figure 52:System Information

Restoring the Default Configuration

Scroll down to

Default Configuration

and select

Restore factory

configuration

to reset the VGA2Ethernet or KVM2Ethernet

device to the factory default configuration. The factory default

configuration is the configuration that the device had when you

received it from Epiphan. It can be useful to return the device to

this configuration if you have made a number of configuration

changes that you want to reverse.

Summary of Contents for KVM2Ethernet





























































































































































































Search results

Summary of Contents for KVM2Ethernet

Reviews:

epiphan KVM2Ethernet, User Manual, Page: 125 / 188

Search results

Summary of Contents for KVM2Ethernet

Reviews: