epiphan KVM2Ethernet, User Manual

Page: 122 / 188

6. Web admin interface Date and Time Configuration
Page 122 VGA2Ethernet
To change maintenance configuration settings
1 Log into the Web admin interface.
2 Scroll down to Maintenance Configuration .
3 Change settings as required and select Save and Apply
Settings .
The changes take effect right away.
Date and Time Configuration
You can set the date and time manually or you can Enable Time
synchronization.
Enable time synchronization, to update the date and time using a
time server. You can select NTP to get date and time updates
from a public network time protocol (NTP) server by connecting
to the server over the Internet. NTP uses UDP port 123. The
default NTP server is time.nrc.ca . You should change this to an
NTP server recommended for your location.
No No The Epiphan device does not
connect to the Epiphan maintenance
server. If required, Epiphan Support
can remotely connect to the Web
admin interface with the same access
privileges as an administrator if you
provide remote access to the
network in some other way (for
example, using port forwarding).
Contact Epiphan Support for
assistance.
Enable
Remote
Support
Enable
Connection
to
Maintenance
Server
Result