Epilog Laser Fusion Pro 32, Original Instructions Manual, Page: 122 / 242

Center Engraving
The Center Engraving feature allows you to define the center of your artwork as the primary reference
point (Home Position) of your engraving or cutting. The Center Engraving feature has been designed to
be used in conjunction with the red dot pointer, using the Jog feature on the Fusion Pro Control Panel.
Center engraving differs from standard printing, where the upper left corner of the page and the upper
left corner of the laser table define your primary reference point.
• You can identify a Center Engraving job at the laser when you see a target icon at the end
of the job name.
If you get a Position Error reading on the display screen, your artwork is going to go outside
of your available work space.
• There are six choices for Center Engraving:
• Center-Center
• Left-Center
• Right-Center
• Center-Top
• Center-Bottom
• Top Left
• Top Right
• Bottom Left
• Bottom Right
• Custom
- 116 -
SECTION 8: SYSTEM FEATURES