CAUTION!
Before commencing, disconnect the
device from the mains. There are parts that
carry mains voltage behind the cover. Never
leave unsupervised when it is open. (Prevent
non specialists and especially children from
gaining access to it.)
Never remove this product from the
electrical baseplate. Disconnect from mains
supply in the event of any damage to any
buttons. Do not use sharp tools to push any
button.
R17-RF - 1 Zone RF Timeswitch
Operating Instructions
Page 1 of 2
Lower the cover on the front of the unit. Move the selector switch to
the PROG SET position. You can now program zone 1.
Press the
or
buttons to adjust the P1 ON time.
Press the
or
buttons to adjust the P1 OFF time.
Repeat this process to adjust the ON & OFF times for P2 & P3.
When completed, move the selector switch to the RUN position.
4. Setting the date and time
1. Factory default settings
7. Reviewing the program settings
8. Boost function
9. Advance function
This function allows the user to bring forward the next switching time.
If the zone is currently timed to be OFF and the ADV is pressed, the zone will
be switched ON until the end of the next switching time.
If the zone is currently timed to be ON and the ADV is pressed, the zone will
be switched OFF until the end of the next switching time.
Press
for this function.
To cancel the ADVANCE function, simply press the button again.
6. Adjusting the program settings
2. Factory program settings
Program:
5/2D
Backlight:
On
Keypad:
Unlocked
Frost Protection:
Off
Lower the cover on the front of the unit.
Move the selector switch to the PROG SET position.
By pressing this will review each of the ON/OFF times for P1 to P3.
When completed, move the selector switch to the RUN position.
This function allows the user to extend the ON period for 1, 2 or 3 hours.
If the zone that you wish to Boost is timed to be OFF, you have the
facility to switch it ON for 1, 2 or 3 hours.
Press once, twice or three times respectively.
To cancel the boost function, simply press the button again.
3. Resetting the timeswitch
Press
Press
Press
Press
Press
Press
Press
Press
Contents
1. Factory default settings
2. Factory program settings
3. Resetting the timeswitch
4. Setting the date and time
5. ON/OFF period selection
6. Adjusting the program settings
7. Reviewing the program settings
8. Boost function
9. Advance function
10. Holiday mode
11. Connect RF thermostat with the timeswitch
12. Disconnect RF thermostat from the timeswitch
13. Backlight mode selection
14. Keypad lock and unlock
15. Copy function
16. Frost protection
17. Master reset
This 1 zone RF timeswitch is designed to
provide ON/OFF control for 1 zone, with
the value added application of in built
frost protection.
It is necessary to press the RESET button prior to initial programming.
This button is located behind the cover on the front of the unit.
Lower the cover on the front of the unit.
Move the selector switch to the CLOCK SET position.
Press the
or
buttons to select the day.
Press the
or
buttons to select the month.
Press the
or
buttons to select the year.
Press the
or
buttons to select the hour.
Press the
or
buttons to select the minute.
Press the
or
buttons to select 5/2D, 7D or 24H
The date, time and function are now set. Move the selector switch to the
RUN position to run the program, or to the PROG SET position to change
the program setting.
AUTO
The timeswitch operates 3 ‘ON/OFF’ periods per day.
ALL DAY The timeswitch operates 1’ON/OFF’ period per day.
This operates from the first ON time to the third OFF time.
ON
The timeswitch is permanently on. **ON**
OFF
The timeswitch is permanently off. **OFF**
Lower the cover on the front of the unit. By pressing the button,
you can change between AUTO / ALL DAY / ON / OFF for Zone 1.
5. ON/OFF period selection
There are 4 modes available on this timeswitch for users to choose for their
individual application.
ZONE
1
Boost
ZONE
1
Boost
ZONE
1
ADV.
ZONE
1
ADV.
20170302_A
W1077_R17-RF_OpI
ns_JW
Important: Keep this document
RUN
CLOCK
SET
PROG
SET
RUN
CLOCK
SET
PROG
SET
Mon-Fri
Sat-Sun
5/2D
P1 ON
P1 OFF
P2 ON
P2 OFF
P3 ON
P3 OFF
6:30
8:30
12:00
12:00
16:30
22:30
7:30
10:00
12:00
12:00
17:00
23:00
All 7 days
7D
P1 ON
P1 OFF
P2 ON
P2 OFF
P3 ON
P3 OFF
6:30
8:30
12:00
12:00
16:30
22:30
Everyday
24H
P1 ON
P1 OFF
P2 ON
P2 OFF
P3 ON
P3 OFF
6:30
8:30
12:00
12:00
16:30
22:30
RUN
CLOCK
SET
PROG
SET
EPH Controls Ireland
Sitecast Industrial Estate, Pouladuff,
Cork, T12 W665, Ireland
[email protected] www.ephcontrols.com
EPH Controls UK
Unit E4, Welland Business Park, Valley Way, Market Harborough,
Leicestershire, LE16 7PS, United Kingdom
[email protected] www.ephcontrols.co.uk