12
2. Transport and Commissioning
2.1 Lifting the truck by crane
1.Only use crane handling equipment gear with
sufficient capacity.
2.Loading weight > net weight of truck (battery
weight for electric trucks).Loading weight not only
net weight of truck but also the stock or the box.
3.Stock (box) should be big enough and strong
enough to bear hole truck.
– Park the truck securely.(see 3.2.4 Parking the
truck securely ).
– Make sure forks are positioned properly for the
pallet. Move forward slowly to insert forks into the
pallet as far as possible and then stop the truck.
2.2 Using the Truck for the First Time
Only operate the truck with battery current. Rectified AC current will damage the
electronic components. Cable connections to the battery (tow leads) must be less
than 6 m .
Preparing the truck for operation after delivery or transport
Procedure
•
Check the equipment is complete.
•
Check the hydraulic oil level.
•
Install the battery if necessary (where required), do not damage battery cable.
•
Charge the battery, (see "4.3 Charging the battery" ).
When the truck is parked the surface of the tyres will flatten. The flattening will
disappear after a short period of operation.
Warning!
– To avoid break the fork be hurt when you move the truck to stock.
– In order to keep the truck out of be scraped,please move the truck void in
void and flat place.
– when you lowering the stock advert status of the place to avoid collapse.
