15
3.2
3.2
3.2
3.2 Operate
Operate
Operate
Operate and
and
and
and run
run
run
run the
the
the
the truck
truck
truck
truck
3.2.1
3.2.1
3.2.1
3.2.1 P
P
P
Preparing
reparing
reparing
reparing
Before the truck can be commissioned, operated or a load unit lifted, the driver must
ensure that there is nobody within the hazardous area.
Checks
Checks
Checks
Checks and
and
and
and operations
operations
operations
operations to
to
to
to be
be
be
be performed
performed
performed
performed before
before
before
before starting
starting
starting
starting daily
daily
daily
daily work
work
work
work
– Visually inspect the entire truck (in particular wheels and load handler) for obvious
damage.
– Visually inspect the battery attachment and cable connections.
Switching
Switching
Switching
Switching on
on
on
on the
the
the
the truck
truck
truck
truck
– Make sure the switch is depressed.
– Insert the key in the key switch and turn it to the right as far as it will go
( position
“ON”)
– Test the warning button .
The truck is now operational.
The battery discharge indicator indicates the existing battery charge status.
– Test the braking operation of the tiller.
3.2.2
3.2.2
3.2.2
3.2.2 Travel
Travel
Travel
Travel
We distinguish between two travel modes:
Truck with a folding operator platform and moving tiller.
Do not reach between the operator platform and the truck panel when you fold up the
platform.
– Pedestrian mode:
Push the side arms in, fold up the operator platform (1). The truck can only be
operated at the reduced travel speed.
– Rider mode:
Push the side arms out, fold down the operator platform (1). The truck can be
operated at maximum speed.
General:
General:
General:
General:
– Set the tiller (5) to the travel zone (F).
– Turn the controller (4) to the required direction (fwd. or rev.).
If the side arms are not folded out,the truck can only be operated at reduced speed.
Do not drive the truck unless the panels are closed and properly locked.When
