EP Equipment 508000003143, Operation Manual

Page: 40 / 91

33
Consumables
Handling consumables type material: Consumables must always be handled
correctly. Follow the manufacturer’s instructions.
Improper handling is hazardous to health, life and the environment. Consumables
must only be stored in appropriate containers. They may be flammable and must
therefore not come into contact with hot components or naked flames.
Only use clean containers when filling up with consumables. Do not mix consumables
of different grades. The only exception to this is when mixing is expressly stipulated in
the Operating Instructions.
Avoid spillage. Spilled liquids must be removed immediately with suitable bonding
agents and the bonding agent/consumable mixture must be disposed of in
accordance with regulations.
Code Type
Specification
Amount
A
Anti-wear hydraulic oil L-HM32
See the table below
Low temperature anti-wear
hydraulic oil (cold storage)
L-HV32
B Multi-purpose grease
Polylub GA352P Appropriate amount
C Heavy duty gear oil
80W-90GL-5 1.8L (Align with oiling port)
Application Amount of Hydraulic Oil
Mast Series Lifting height(mm) Amount(L)
3-stage Mast
4200 8.5
5330 10
5.3.3 Maintenance Instructions
Prepare the truck for maintenance and repairs
All necessary safety measures must be taken to avoid accidents when carrying out
maintenance
and repairs. The following
preparations must be made:
•
Park the truck securely (See 3.5 Parking the truck
securely Page 21 ).
•
Remove the key to prevent the truck from
accidentally starting.
•
When working under a raised lift truck, secure it to
prevent it from tipping or sliding away.
Open the cover
• Remove the two screws (1).