EOS VITAE, Assembly And Operating Instruction

Page: 18 / 38

18
EN
Attention!
If there is any skin disease or illness, you
should ask a doctor before using.
Ensure that this hot convection air can es-
cape by rising freely (ventilation).
If necessary, appropriate steps should be
taken (e.g. thermal protection slabs) to
ensure that the wood is not exposed to
inadmissible temperatures.
• The infrared radiator is equipped with
a silicon connection cable with a 3-pin
connector. It should be connected to the
control unit as per connection diagram.
An optional plug adaptor may be used to
facilitate the connection.
• Up to 5 infrared radiator may be connected
to the control unit through one line using
such plug adaptor.
For practical reasons, the connector and
plug adaptor should be fitted on the booth
ceiling.
• Take care to ensure that the emitter is
not subject to any mechanical stresses
(knocks, pressure). Risk of breakage.
• Although breakage is unlikely if it is used
properly, if the emitter should break, re-
place it with a new one.
Caution: fire risk in the case of a bro-
ken emitter.
• The infrared radiator is designed for mount-
ing in an IR warming cabins only. It just can
be used with a controller. The warranty is
not to apply for other use.