SBM-App Modul - Installation and Operating Instructions
EN-5
General safety instructions
1
General safety instructions
1.1
Mounting and electrical installation
These installation instructions are intended for qualified per-
sonnel familiar with the laws and regulations applicable to
electrical installations at the installation site. Observe the fol-
lowing general safety instructions during mounting, configu-
ration and commissioning of the product.
Risk to life and limb and risk of fire
Risk to life and limb from electric shock and fire in the event of im-
proper or faulty electrical connection. This risk also applies follo-
wing completion of the installation work.
Ensure compliance with the applicable standards and regula-
tions for electrical installation.
The system must be disconnected and removed entirely from
the mains supply before commencing installation and repair
work.
The module housing may not be opened.
Damage due to incorrect mounting location
The module is not suitable for outdoor use.
It must be operated only inside buildings and may not be expo-
sed to environmental conditions such as extreme humidity and
moisture or the possible formation of condensation or corrosi-
ve substances in the ambient air, as well as other weather con-
ditions.
Similarly, excessive cold and extreme exposure to sunlight must
be prevented.
Protect the unit accordingly if there is an increased risk of me-
chanical damage.
