EOS SBM App module and EOS Spa Control app – quick start up guide
Print no. 2934 4672 13.21
EOS SBM App Module
General guide for setup and operation
Before the setup
Install the SBM App module and connect it to the sauna control unit with the pre-mounted sauna bus
cable (requires a free RJ12 sauna bus connector in the sauna control unit). Connect the module to
your router / cable modem (internet access point) using a standard Ethernet cable (RJ45). Make sure
the internet connection is available and is not blocked by the firewall (port 7250 should be available).
Make sure the sauna control unit has been set up correctly and remote control has been cleared
during initial setup.
01 Setup preparation
Download the free “EOS Spa Control” app on your mobile device from the Google PlayStore or Apple
AppStore and install it. Keep the sauna control unit and the SBM App module powered (stand by
mode). Launch the app. Self-guided setup process will lead you through all steps.
02 Welcome screen
Welcome to the setup of your EOS Spa Control app. Tap on “launch setup”
button to start.
03 MAC address
For setup and pairing you will need an individual MAC address. This
address you can find printed on the type shield attached on the SBM App
module.
