manualshive.com logo in svg

EOS P 396, Training Manual

Share
Download
EOS P 396 Training Manual Download Page 128

7

Operation of machine & accessories

7.16

Training manual • Basic training • Status 03.14

EOS P 396

Monitoring building process using Quality Assurance module

The

 Quality Assurance

 module generates the Job Quality Report as well as the Part 

Report. During this process the data for a selected building job are prepared, 

analysed, evaluated and clearly depicted. Using the Part Report a freely definable 

number of completed parts can be summarised in one report as an evaluation of the 

building task.
All the available information of relevance for quality can be specifically exported to 

statistics. Data over a selected period can be shown, filtered and depicted 

graphically. A trend analysis is made easier by querying tasks undertaken such as 

maintenance, powder changes or software updates.
Functions of the 

Quality Assurance

 module:

➢

Showing events

➢

Preparing, exporting 

Job Quality Report

➢

Preparing, exporting 

Part Quality Report

➢

Preparing statistics.

Events and reports in the EOSTATE Quality Assurance module

You will find further information on function and operation in the

Software 

EOSTATE

 manual, section 

6, Quality assurance module

.

Summary of Contents for P 396











































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands