InfraStyle / InfraStyle i - Operating Instructions
41
Operation
Deleting the heating period in a series
1
: Select and confirm.
2
: Select and confirm.
3
Select the day of the week and confirm.
4
Select the number of the heating period and confirm.
5
Set the start time to --:-- and confirm the setting twice.
This deletes the specific heating period for the current series. All
other defined heating periods remain set.
6
Repeat the step as needed for additional start times in the series.
When all heating periods on a given day of the week are deleted, the
day appears in white again on the display.
4.5.8 Switching ECO mode on/off
ECO mode is activated during intermissions in operation to lower the tem-
perature and prevent the cabin from cooling down completely. The heat-
ing must be switched on to activate ECO mode.
ECO mode can be activated as follows:
Activating ECO mode in the main menu,
Using a push button that is available as an option.
ECO mode can be deactivated as follows:
It is switched off automatically once the period of time set in the service
menu expires. A runtime must be defined in the service settings for this.
See 5.1.7 Setting the ECO runtime,
Cancelling ECO mode from the main menu,
This option allows you to cancel ECO mode early even if a runtime has
been pre-set.
Using a push button that is available as an option.
26
