EOS Herkules XL S120 - Installation and Operating Instructions
53
Maintenance
Maintenance
This sauna heater is made of low-corrosion material. To ensure a long ser-
vice life, take care of and perform regular maintenance on your sauna
heater. Ensure that openings in the intake area and heat reflectors are
never blocked. These can easily become blocked with lint and dust as fresh
air is drawn in. This limits the air convection ability of the sauna heater and
could lead to impermissible temperatures. Clean and/or descale the units
as needed. Contact your sauna retailer or the manufacturer directly if you
notice malfunctions or signs of wear and tear. If you do not use your sauna
for a longer period of time, ensure that at the time of recommissioning no
towels, cleaners or other objects are lying on the sauna heater or vaporiser.
Contact your sauna retailer or the manufacturer directly if you notice mal-
functions or signs of wear and tear.
6.1 Cleaning
The sauna heater must be cleaned regularly. The cleaning frequency
depends on how often it is used. It is not necessary to clean the inside of
the heater during periodic cleaning.
CAUTION
Risk of injury from sharp edges
Use suitable personal protective equipment, e.g. gloves, when
cleaning parts with sharp edges.
Cleaning the heater
1
Switch off the heater from the control unit.
Wait until the heater is completely cool, if necessary.
2
WARNING! Do not clean the inside of the sauna heater, as this poses a
risk of electric shock.
Clean only the outside of the heater. Use only household cleaning
agents.
3
CAUTION! Openings can easily become blocked with lint and dust as
fresh air is drawn in. This limits the air convection ability of the sauna
heater and could lead to impermissible temperatures.
Remove lint and dust from openings and heat reflectors.
