EOS Compact DP/HP - Installation and Operating Instructions
EN-69
Troubleshooting
8
Troubleshooting
8.1
Error messages
If an error occurs, the active heating is interrupted. Error messages are
shown on the display as an error code, e.g. E0001. The icons indicate the
currently applicable error category. For errors that are not listed here,
please contact EOS Service and provide the error code. See Service
address,
Water shortage warning
Reason
Solution
Not enough water in the vapor-
iser.
Refill water.
Install automatic filling, if neces-
sary.
Malfunction when automatically
filling water.
Check water supply. Clean the fil-
ter at the water supply connector
if necessary.
No water supply, water inlet valve
clogged, blocked, or defective.
Clean the water inlet valve and
check that it functions properly.
Replace the water inlet valve if
necessary.
The error message is deactivated if water is filled within the 3-minute
refill period.
