EOS Compact DP/HP - Installation and Operating Instructions
EN-61
Operation
Switching off the timer
1
Press the On/Off button for 2 seconds.
Pressing
to start the system again reactivates the timer.
Deactivating the timer
1
Choose the Timer function.
2
Set the following values with
.
6.7.8
Profiles
Values and modes are pre-set in profiles, e.g. temperature, Finnish or Bi-O
mode, and humidity. You can set four different profiles. The settings you
change in a profile are saved for this particular profile. Profiles cannot be
set in the holiday resort mode. See 6.8.3 Modes – holiday cottage, holiday
resort,
Selecting a profile
1
Press the profile soft key until the desired profile (1–4) is displayed.
6.7.9
HOT mode (intense heating)
This setting is available only in Finnish mode. It allows you to start opera-
tion at a higher temperature in order to heat the sauna to the maximum
temperature before and/or during an infusion phase, thereby keeping the
sauna stones hot to achieve an optimal water splash effect. The runtime for
HOT mode is set to 10 min. by the factory. It can be set, see: 6.8.2 Runtime
for HOT mode,
--:-- (timer is deactivated)
1
