www.enware.com.au Call 1300 369 273
3
technical data
Inlet Connection
15mm (1/2” BSP)
Recommended Working Pressure Range
100 - 500 kPa*
Flow Rate
(Aerator supplied standard with a spout)
8 lpm supplied standard.
5 lpm available on request.
Maximum Hot Water Supply Temperature
70 °C *
Operating Voltage
24V DC
Maximum Current
1A
Power Consumption
Less than 10W
Sensor Min / Max Ambient Temperature
Minimum: -5 °C, Maximum: 50 °C
Sensor Protection Rating
IP67 for the front panel and sensor lens.
No IP rating behind panel.
Sensor Range
100 - 235mm
Flow time
Runs as long as hand is within range. (Active Sense)
When out of range, runs for 6 seconds. (Afterflow)
Maximum continuous flow period per sensor
activation is 45 seconds. (Security Time Out)
Optional program settings are available on the following:
*Enware products are to be installed in accordance with the Plumbing Code of Australia (PCA) and
AS/NZS3500. Installations not complying with PCA and AS/NZS 3500 may void the product and
performance warranty provisions.
Reference should also be made to the Australasian Health Facility Guidelines (AHFG), ABCB and
Local Government regulations when considering the choice of, and the installation of these
products.
This product must be installed and commissioned by a qualified plumber.
For use with potable water only.
NOTE: Enware Australia advises:
1. Due to ongoing Research and Development, specifications
may change without notice.
2. Component specifications may change on some export
models.
installation compliance
•
Adjust Minimum Flow Time (Afterflow)
•
Adjust Maximum Flow Time
• Adjust Sensor Range
•
Purge Flush Running Time
•
Purge Flush Period Frequency
•
Mode – On /Off Demand or Active Sense
The optional settings are available at the time of ordering. Contact Enware for more details.
The more
stars the more
water efficient
8
litres per
minute
WATER RATING
www.waterrating.gov.au
The more
stars the more
water efficient
5
litres per
minute
WATER RATING
www.waterrating.gov.au