Primary Supplies
☐ 99% isopropyl alcohol (IPA) or
☐ Nitrile gloves
☐
Diluted PC1 cleaning agent
☐ Absorbent paper towels
Order from Envisiontec or
☐ Air compressor
authorized distributor:
☐ Makeup or paint brush
SAP part # ACC-99-1000
Dilute - 2 parts water / 1 part PC1
Environmental Conditions
Situate the PWA 2000 in a ventilated area away from sources that
can generate fire or heat - see
Safety Instructions
. Keep the PWA
2000 at least 8 in / 20 cm from the wall. Keep the PWA 2000 in an
environment with temperatures within 65° to 82° F / 18° to 28° C.
Technical Specs
External dimensions:
12.6 x 13 x 9.68 in / 320 x 330 x 246 mm
Washing tank dimensions:
5.7 x 5.7 x 4.13 in / 145 x 145 x 105 mm
Washing system:
Contactless agitator
Washing Mode:
Basket or platform
Liquid capacity:
118.35 oz
/ 3.5 lt
Compatibility:
Universal adapter (optional)
Programs:
Strong - Medium - Delicate
Management:
16 bit IDM processor
Interface:
3.2 in TFT touch screen
Controls:
Auto off
Connectivity:
2.4 Ghz WIFI
Power supply:
External
Power supply voltage:
100 - 230V 0.3A
Recommended Washing Times
Below is a list of recommended washing times for EnvisionTEC
materials in the PWA 2000 washing apparatus. Washing times are
subject to change.
(H:MM:SS) (H:MM:SS)
Material
Program
Time:
IPA
- or - Time:
PC1
ABS Tough
High
00:03:00
00:06:00
EC-3000
High
00:01:00
00:06:00
E-Dent MFH
High
00:05:00
00:06:00
E-Denture
High
00:05:00
00:12:00
E-Guard
High
00:05:00
00:06:00
E-Guide Tint
High
00:03:00
00:06:00
E-Gum
High
00:05:00
00:06:00
E-IDB
High
00:05:00
00:06:00
E-Model
High
00:03:00
00:06:00
(Light, Beige, HS)
E-OrthoShape
High
00:03:00
00:06:00
E-Partial
High
00:03:00
00:06:00
Epic
High
00:00:30
00:06:00
E-Rigid Form
High
00:05:00
00:06:00
(Amber, Charcoal)
E-SepFree
High
00:01:00
00:06:00
HTM140
High
00:02:00
00:06:00
(V2, V3)
PIC-100
High
00:00:30
00:06:00
Press-E-Cast
High
00:03:00
00:06:00
WIC-402
High
00:03:00
00:06:00
Do not expose models to alcohol for an extended period of time
.
For more specific post processing information on the material used,
see the Cookbook for that material. Cookbooks are available for
download in the E-Team, or by contacting technical support.
The Parts Washing Apparatus (PWA 2000) is a convenient tool
to assist in removing uncured material from 3D printed models.
The removable washing compartment allows for ease of use
when adding or removing models from the PWA 2000. The PWA
2000 offers a selection between three washing programs, so
that the user can accurately clean the most delicate models
and larger, more complex models effectively and efficiently.
These selections can be made directly on the easy-to-use touch
screen.
Applicable Printers:
All cDLM and DLP printer series
© EnvisionTEC Page 1 of 3
Technical Guide
PWA 2000
TS-OPI-PWA-2000-V20200219-FN-EN.pdf
Handle
PULL
PULL
LEVEL
LOW
MED
HIGH
PWA 2000 FRONT VIEW
Washing
compartment lid
Touch screen
Fig. 1
Lock for washing
compartment lid
Removeable
washing
compartment
Drainage
spout
LEVEL
PULL
PULL
LOW
MED
HIGH
PWA 2000 REMOVEABLE WASHING COMPARTMENT
Fig. 2
Handle
Drainage spout
Interior
grate